Primary Secondary Flasher

8-4449

• Can be used with incandescent or LED warning lights

    • Fully Encapsulated (potted)

    • Outputs have short-circuit protection

    • Outputs have over-current protection

    • Protected against over-voltage

    • Protected against reverse polarity

    • Ground activated primary / secondary inputs Unit diagnostic LEDs

fax• Maximum current output of 55 AMPs per terminal

• Complies with Federal Specifications: KKK-A-1822 D & E

Size: 5.00”W x 2.75”H x 3.50”D

Weight: 1.50 lbs

Operating voltage: 9 - 18 VDC

Operating temperature: -40 C - +70 C

Off Key Current Draw: 0A

Input Signal current draw: 14 mA

Output amperage rating: 55 Amps each

Maximum total unit current: 100 A

Flash Rate: 75-80 flashes per minute

Order Online